Find hardware, software and services to develop better Mobile Computing technology.

Smux 5.0 Support NFC AI Touchpad Implement

IT8987 is a highly integrated embedded controller with system functions suitable for mobile system applications. The IT8987 directly interfaces to the LPC bus and provides ACPI embedded controller function, keyboard controller (KBC) and matrix scan, PWM and ADC for hardware monitor, PS/2 interface for external keyboard/mouse devices, BRAM, CIR, and system wakeup functions for system power management.

ASM3142supports two USB3.1 Gen-II ports and perform trusting high speed bandwidth with PCI Express Gen-III x2 supporting. It uses advance process with low voltage supply, following standard PCI Express/USB bus power management and advance chip power management to reduce total power consumption efficiently under idle/standby state.

ASM2806, a low latency, low cost and low power 6 lane, maximum 4 downstream ports packet switch. With upstream PCIe Gen3x2 bandwidth, ASM2806 can enable users to build up various high speed IO systems, including server, system storage or communication platforms.

ASM1162, a SATA host controller(AHCI) with upstream PCIe Gen3 x1 and downstream two SATA Gen3 ports. It's a low latency, low cost and low power AHCI controller. With two SATA ports and cascaded port multipliers, ASM1162 can enable users to build up various high speed IO systems, including server, high capacity system storage or surveillance platforms.

ASM1352R is ASMedia’s single chip solution to bridge the USB 3.1 Gen2 to dual SATA interface. ASM1352R supports one USB 3.1 Gen2 ports and two SATA device ports, enabling USB PHY up to 10Gbps in compliance with USB 3.1 specifications and enabling Serial ATA PHYs up to 6Gbps high speed interface, following Serial ATA Revision 3.2 Specification.

ASM1153E is the ASMedia third generation single chip solution, bridging the USB3.0 to Serial ATA host interface with highly integrated SuperSpeed USB3.0, High Speed USB2.0 and SATA1.5/3.0/6.0 Gbps ASMedia self-designed PHYs. Along with excellent compatibility with USB3.0 hosts and SATA devices, ASM1153E uses advanced process technology to optimize the chip power consumption. 

ASM2812, a low latency, low cost and low power 12 lane, maximum 6 downstream ports packet switch. With upstream PCIe Gen3x4 bandwidth, ASM2812 can enable users to build up various high speed IO systems, including server, system storage or communication platforms.

The W25Q512NW support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI, Quad Peripheral Interface (QPI) as well as Double Transfer Rate (DTR): Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories.

The Synaptics S9Axx is a high performance touch controller with up to 60 sensing pins (up to 40 RX) for use with touchpads of up to 7.8 inches in diagonal. The S9A5H is recommended for use in PCs, and supports self-capacitance, mutual- capacitance, hybrid sensing, and up to 10-finger detection. It supports moisture detection, and high performance hardware filtering for noise mitigation targeting AC charger noise and severe common mode noise. S9A5H security meets and exceeds the NIST SP800-193 requirements for firmware update protection, corruption detection, and recovery.

The Synaptics S98xx is a high performance touch controller with up to 54 sensing pins for use with touchpads of up to 7 inches in diagonal. The S98xx is recommended for use in PCs, and supports self-capacitance, mutual- capacitance, hybrid sensing. It supports moisture detection, and high performance hardware filtering for noise mitigation targeting AC charger noise and severe common mode noise.

The Synaptics S95xx is a high performance touch controller with up to 44 sensing channels for use with displays of up to 6 inches in diagonal, with a 16:9 ratio and a sensor pitch of 5.5 mm. The S95xx supports self-capacitance, mutual capacitance, hybrid sensing, and up to 5-fingerdetection. Report rates up to 140 Hz and flexible sensing frequency up to 500 kHz are also supported The S95xx supports moisture detection, and high performance hardware filtering for noise mitigation targeting AC charger noise and severe common mode noise.

–SMUX 4.0–54ch (32RX, 22TX)–134x92 @4.2mm pitch–LightingPad–HapticPad 1.0

SMUX 3.544ch (18RX, 26TX)109x75 @ 4.2mm pitchLow Power Consumption 

The NPCX498SA0BX is a highly integrated embedded controller (EC) with an embedded ARM® core and integrated advanced functions. It is targeted for a wide range of portable applications and provides best-in-class, complete EC functionality.The NPCX498SA0BX incorporates the 32-bit ARM® Cortex®-M4 core, on-chip ROM, standard and battery-backed RAM memories, an extended set of system support functions, and a high-performance Flash Interface Unit (FIU), which interfaces directly with internal and external SPI flash memory devices.The NPCX498SA0BX interfaces with the Host via an eSPI interface or SPI interface or I3C® interface and also supports an I2C® interface.In addition, the NPCX498SA0BX includes the high-performance Nuvoton Cryptographic library (NCL), based on the device’s security hardware accelerators.The NPCX498SA0BX includes power switch logic for ultra-low power consumption and a high-accuracy, 32 KHz crystal oscillator. 

The PS176 is a DisplayPort™ (DP) to HDMI™ 2.0 video interface converter ideal for cable adapters, television receivers, monitors, and other applications requiring video protocol conversion. It will accept any DisplayPort input format including DP 1.1a, DP 1.2a, DP 1.3, or DP 1.4.  It can output legacy HDMI and DVI video modes as well as the HDMI 2.0 format. HDMI 2.0 is supported up to the allowable maximum TMDS date rate of 6Gbit/sec, enabling 4K UHD video at 60 frames per second in 4:4:4 video mode at 24 bits-per-pixel.

The Parade PS195 is a high-performance converter that receives DisplayPort 2.0 streams and outputs HDMI 2.1 signaling (TMDS or FRL). It features an integrated Arm Cortex-M4 processor for robust, autonomous operation.Key Specifications:Video Output: HDMI 2.1 FRL up to 12Gbps/lane. Supports resolutions up to 10K@50Hz using DSC pass-through and 4K@120Hz.Video Input: DP 2.0 up to HBR3 (8.1Gbps) over 4 lanes.Advanced Features: Supports DSC 1.1/1.2a with FEC, Dynamic HDR, and Variable Refresh Rate (VRR/Adaptive-Sync). Includes QMS and ALLM for gaming.Audio: Supports up to 32-channel L-PCM 3D audio and 192kHz sample rates.Security: Full HDCP 1.4/2.3 repeater support with Secure Boot and encrypted firmware updates.Power & Package: Market-leading low power consumption for portable devices. Housed in a 74-pin 7x8mm QFN.

PS8833 is a USB4®, DisplayPort™ 2.1 and Thunderbolt™ 4 retimer for host applications. It conforms to the USB4 and USB 3.2 specifications and related USB-IF specifications addressing retimer and alternate mode support and conforms to the VESA DisplayPort Alternate Mode on USB Type-C® 2.0 standard. In addition to full USB4 Gen 3×2 and USB 3.2 Gen 2×2 and DisplayPort™ 4 lane up to UHBR20, the PS8833 supports the multifunction operation of USB 3.2 Gen 2×1 with DP 1 or 2 lane support as defined by the DP Alt Mode standard. With its fully enabled USB4 and alt mode features the PS8833 provides a simple but versatile high-performance retimer solution for high speed signal integrity and compliance margin at the USB-C receptacle. With fully support on USB4 low power state, PS8833 also provides ultra-low standby power to extend the system battery life as well as the USB4 ecosystem and the user experience.

The PS185 is a DisplayPort™ v1.4a to HDMI™ 2.0b video interface converter ideal for motherboard requiring video protocol conversion. The input is a DP v1.4a compliant upstream facing port that accepts audio and display data, and the output is an HDMI 2.0b compliant downstream facing port. In supporting DP v1.4a, the PS185 can accept compressed display data using DSC (Display Stream Compression) and a link rate up to HBR2 (5.4 Gbps). The PS185 provides anonymous, automatic operation enabled by an integrated microprocessor that uses an inexpensive external SPI ROM for configuration and microcode. The PS185 fully supports both HDCP 1.4 and HDCP 2.3 content protection, including the HDCP repeater function, with integrated HDCP Rx & Tx keys.

The PS8719E is a bidirectional USB 3.1 repeater/redriver which integrates two channel equalizers and drivers to re-condition USB 3.1 Gen 1 signals that have a data rate of 5.0Gbps . The PS8719E requires a single 3.3V supply. Supports USB 3.1 Gen 1 signaling data rate of 5.0GbpsSupports Low Frequency Periodic Signaling (LFPS) with fast LFPS enter/exit timeSupports full USB 3.1 Gen 1 power management with automatic power savingSupports hot plug with Automatic Receiver DetectLow power consumptionSingle 3.3V power supply24-pin TQFN Halogen free RoHS Package0°C to 85°C operating temperature rangeESD: Human Body Mode at 8KV for all connector pins