Qualcomm QCC74x is a tri-radio chipset integrating 1x1 Wi-Fi 6, Bluetooth 5.4, and IEEE 802.15.4 (Thread and Zigbee-ready) powered by a 32-bit RISC-V MCU up to 325 MHz an...
Qualcomm QCC74x is a tri-radio chipset integrating 1x1 Wi-Fi 6, Bluetooth 5.4, and IEEE 802.15.4 (Thread and Zigbee-ready) powered by a 32-bit RISC-V MCU up to 325 MHz an...
Qualcomm QCC74x is a tri-radio chipset integrating 1x1 Wi-Fi 6, Bluetooth 5.4, and IEEE 802.15.4 (Thread and Zigbee-ready) powered by a 32-bit RISC-V MCU up to 325 MHz and stacked memory (pSRAM and NOR flash).
Unlike other Wi-Fi/Bluetooth 5.4/15.4 combination chipsets on the market, QCC74x is integrated with a wide array of on-chip features,...
Qualcomm QCC74x is a tri-radio chipset integrating 1x1 Wi-Fi 6, Bluetooth 5.4, and IEEE 802.15.4 (Thread and Zigbee-ready) powered by a 32-bit RISC-V MCU up to 325 MHz and stacked memory (pSRAM and NOR flash).
Unlike other Wi-Fi/Bluetooth 5.4/15.4 combination chipsets on the market, QCC74x is integrated with a wide array of on-chip features, including a powerful 32-bit RISC-V processor with an FPU and DSP running up to 325 MHz, 484 KB SRAM, 48 KB cache, and 128 KB ROM, as well as an optional 4/8/16 MB pSRAM and 8 MB N...
Full radio integration
QCC74x integrates all of the following radios required for IoT connectivity: 1x1 Wi-Fi 6, Bluetooth 5.4 dual mode (BR/EDR and LE with coded PHY), and IEEE 802.15.4 (Thread and Zigbee-ready). It will support Matter over Wi-Fi, Thread, as well as Ethernet with BLE commissioning capability.
High computing power
In addition to radio integration, QCC74x also has a powerful 32-bit RISC-V microcontroller up to 325 MHz with a DSP and FPU at its core. It also has the option to add stacked memory like pSRAM and NOR flash to boost computing capability.
High security
QCC74x has a built-in security acceleration engine, supporting both symmetric and asymmetric algorithms. It provides security services like Secure Boot and Secure Debug, and can support public key accelerators, TRNG, and QSPI (XiP) on-the-fly AES decryption. It is qualified for PSA Certified Level One.
Rich peripherals and multimedia support
QCC74x has 35x on-chip GPIO pins that can be multiplexed to support rich peripheral interfaces like QSPI, SDIO, SD card, SPI, UART, I2C, I2S, PWM, 12-bit ADC, 12-bit DAC, IR remote, RMII (10/100 Ethernet), CAN (ISO11898), DVP camera, and DBI display. It has built-in motion JPEG to support 720p video codec as well as MIC input with 8/12/16/22.05/24/32/44.1/48 KHz audio sampling and speaker output.
User-friendly development environment and tools
QCC74x will be provided with an open-source software SDK available on CodeLinaro, the VS Code-based IDE supported by size- and cost-optimized modules as well as associated development kits.
QCC74X
Features
- Full radio integration to address all IoT connectivity needs
- High-performance 32-bit RISC-V MCU with large memory resource and a stacked memory SiP option
- Advanced hardware-based security featuring public key accelerator, TRNG, and QSPI (XiP) on-the-fly AES decryption
- Secure Boot and Secure Debug
- Rich peripheral interfaces including Ethernet, CAN, etc.
- Direct camera interface (DVP) and display control (DBI)
- Multimedia features like motion JPEG (720p) and MIC and speaker support
- Support hostless and hosted (RCP and NCP) operation modes
- Open-source support with SDK on CodeLinaro, VS Code IDE market extension, as well as modules and associated development kits
- with DSP and FPU, 128KB ROM, 4Kb eFuse and 1/2/4KB OTP
- In the process of being qualified
- QFN-40 at size 5.0x5.0x0.85mm and QFN-56 at 7x7x0.85mm
- on-chip (32KB I-Cache and 16KB D-Cache)
- In the process of being qualified
- on-chip (32KB I-Cache and 16KB D-Cache)
- each for Bluetooth Low Energy, Application & Security subsystem
- with FPU
- XiP over QSPI Flash
