13 results

Filter by:

AK9569
AK9569 is a highly integrated single chip one slot USB Contact Smart Card Reader controller. AK9569 supports multiple international standards including ISO7816 for IC card standard, PC/SC 2.0 for windows smart card standard, Microsoft WHQL, EMV for Europay MasterCard Visa standard and USB-IF CCID standard.

KEY FEATURES:

  • Self-Verified
  • Support ISO7816 Class A, B and C (5V/3V/1.8V) Cards
  • Support T0, T1 Protocol
  • Support short APDU and extended APDU
  • Support PC Smart Card Industry Standard - PC/SC 2.0
  • Compatible with Microsoft USB-CCID inbox driver
  • Meet Microsoft WHQL Smart Card Reader requirements
  • Support card power over current protection mechanism
  • Meet EMV L1 and PBOC L1 Certification Specification
  • Package: QFN-28, 5mm x 5mm
Chipset
Type Development Kits
ELAN Touchpad Gen 8
Smux 5.0 Support NFC AI Touchpad Implement

KEY FEATURES:

  • Self-Verified
Chipset
Type System-on-Modules
NPCX498SA0BX
The NPCX498SA0BX is a highly integrated embedded controller (EC) with an embedded ARM® core and integrated advanced functions. It is targeted for a wide range of portable applications and provides best-in-class, complete EC functionality.The NPCX498SA0BX incorporates the 32-bit ARM® Cortex®-M4 core, on-chip ROM, standard and battery-backed RAM memories, an extended set of system support functions, and a high-performance Flash Interface Unit (FIU), which interfaces directly with internal and external SPI flash memory devices.The NPCX498SA0BX interfaces with the Host via an eSPI interface or SPI interface or I3C® interface and also supports an I2C® interface.In addition, the NPCX498SA0BX includes the high-performance Nuvoton Cryptographic library (NCL), based on the device’s security hardware accelerators.The NPCX498SA0BX includes power switch logic for ultra-low power consumption and a high-accuracy, 32 KHz crystal oscillator. 

KEY FEATURES:

  • Snapdragon® Compute Verified
  • ARM Cortex-M4 with FPU and MPU, up to 120 MHz
  • Internal memory: 512 KB RAM, 1MB flash and 128B battery backed RAM
  • External memory: supports up to two SPI flash devices, total of 128MB, up to 60 MHz
  • Package: 144-ball VFBGA, 8mm x 8mm, 0.65mm ball pitch
Chipset
Type Reference Design Platforms
S9Axx family High-Performance Touch Sensors
The Synaptics S9Axx is a high performance touch controller with up to 60 sensing pins (up to 40 RX) for use with touchpads of up to 7.8 inches in diagonal. The S9A5H is recommended for use in PCs, and supports self-capacitance, mutual- capacitance, hybrid sensing, and up to 10-finger detection. It supports moisture detection, and high performance hardware filtering for noise mitigation targeting AC charger noise and severe common mode noise. S9A5H security meets and exceeds the NIST SP800-193 requirements for firmware update protection, corruption detection, and recovery.

KEY FEATURES:

  • Accidental Contact Mitigation support
  • Passive pen support
  • Thick glove support
  • Advanced moisture support
Type Reference Design Platforms
S95xx family High-Performance Touch Sensors
The Synaptics S95xx is a high performance touch controller with up to 44 sensing channels for use with displays of up to 6 inches in diagonal, with a 16:9 ratio and a sensor pitch of 5.5 mm. The S95xx supports self-capacitance, mutual capacitance, hybrid sensing, and up to 5-fingerdetection. Report rates up to 140 Hz and flexible sensing frequency up to 500 kHz are also supported The S95xx supports moisture detection, and high performance hardware filtering for noise mitigation targeting AC charger noise and severe common mode noise.

KEY FEATURES:

  • Accidental Contact Mitigation support
  • Best-in-class capacitance sensing
  • Thick glove support
  • Advanced moisture support
  • Supports Microsoft® Windows® Precision TouchPad specification natively via firmware
Type Reference Design Platforms