Effective October 1, 2012, QUALCOMM Incorporated completed a corporate reorganization in which the assets of certain of its businesses and groups, as well as the stock of certain of its direct and indirect subsidiaries, were contributed to Qualcomm Technologies, Inc. (QTI), a wholly-owned subsidiary of QUALCOMM Incorporated. Learn more about these changes

You are here

SnapTrack Announces Availability of SnapCore Multi-Mode GPS Location Solution for Highly Integrated ICs and Wireless Devices

– December 13, 2000 – SnapTrack, Inc., developer of Wireless Assisted GPS™ (WAG) location systems and a wholly owned subsidiary of Qualcomm Incorporated (Nasdaq: QCOM), today announced the commercial availability of its SnapCore™ multi-mode GPS wireless location product, adding a new dynamic capability to its family of advanced WAG location solutions. SnapCore, a baseband GPS solution, offers three different modes of operation, combining SnapTrack's proven high-performance WAG architecture with stand-alone GPS functionality. SnapCore is designed to outperform all conventional GPS solutions on the market, providing accurate location information for wireless products used both inside and outside of wireless network coverage, and supporting a range of location service infrastructure implementations. The SnapCore multi-mode GPS navigation solution enables on-demand location services, such as emergency location safety features and mobile yellow pages, in almost any network configuration and in nearly any signal environment, ranging from wide open spaces to dense urban canyons - even inside buildings.

"The SnapCore multi-mode GPS solution demonstrates SnapTrac's commitment to lead the industry in the development of high-availability, all terrain, cost-effective wireless location technologies," said Steve Poizner, president of SnapTrack. "With the SnapCore solution, our partners and licensees have the flexibility to use the same technology across multiple products and multiple air interfaces, tailored to operate in the mode most suitable for their particular application. This flexibility, coupled with the outstanding performance in each mode, means this solution can be used for current products such as phones and PDAs as well as for a wide variety of emerging product applications such as child safety tags, health and personal security devices, computer games, asset tracking devices and a host of others."

The patented SnapCore solution is available today, having been field tested and packaged for technology licensing. SnapCore enables the tight integration of WAG into any wireless communication device by embedding logic gates into components that already exist in the device or by implementing the gates on a small integrated circuit placed alongside existing components. To ensure quick and reliable system level integration, SnapCore is fully supported by SnapTrack's SnapSmart™ location server software.

By leveraging SnapTrack's proven algorithms for multipath mitigation, sensitivity enhancement, and fast response time, and combining this with new GPS processing techniques and a massively parallel GPS signal processing engine, SnapCore provides unmatched GPS acquisition speed and sensitivity while minimizing cost, space and power. These features provide optimum performance in all three modes of operation:

  • SmartServer mode - a server-based mode, in which the position calculations are performed in the location server with GPS measurements provided by the SnapCore product embedded in the mobile terminal. In this mode, SnapCore simultaneously provides 5-to-10 meter outdoor accuracy, 3-to-5 second cold start times, and 20dB sensitivity enhancement beyond most conventional GPS systems, with the distribution of the location information managed by the wireless network. This mode can be readily combined with other location techniques (i.e., network ranging information, altitude aiding information, etc.) to provide a better overall location system than GPS alone.
  • ThinServer mode - a mobile terminal-based mode, in which the position calculations are performed in the mobile terminal with some assistance from a location server. In this mode, SnapCore simultaneously provides 10-to-15 meter accuracy, 3-to-5 second cold start times, and 20dB sensitivity improvement beyond many conventional GPS systems, with the distribution of the location information managed by the handset.
  • Autonomous GPS mode - a mobile terminal-based mode requiring no location server or network support, with the distribution of the location information managed by the handset. In this mode, the SnapCore GPS processing engine simultaneously provides, without any wireless assistance, a 10-to-20dB sensitivity advantage and a much faster time-to-first-fix as compared to many other conventional GPS solutions. This mode allows the user to benefit from location information even when not connected to a wireless network or when connected to a network that does not support a WAG implementation.

The SnapCore architecture includes many features that allow for easy integration into a variety of wireless device frequency plans and architectural configurations. Key features include:

  • Patented, massively parallel processing architecture that provide the most sensitive GPS architecture available today
  • Advanced processing techniques that provide industry-leading cold start times in all modes
  • Link-aware™ operation that utilizes time and frequency information from the wireless network to further enhance performance and GPS processing speed
  • Three operational modes that provide location information in any wireless infrastructure implementation
  • Fault detection and isolation that improve accuracy and eliminate bad position information
  • Specially designed architecture that optimizes reliability and yield in fluctuating signal environments
  • Software-based timing algorithms that enable air-interface independence and WAG operation in unsynchronized networks

SnapTrack's Personal GPS™ wireless location technology fuses the intelligence and power of networks in the mobile environment with the accuracy and coverage of the Global Positioning System. Based on SnapTrack's thin-client Wireless Assisted GPS system, SnapTrack's solutions improve upon conventional GPS by combining information from GPS satellites and wireless networks to accurately and reliably pinpoint a wireless phone. While traditional GPS receivers may take several minutes to provide a location fix, SnapTrack's system generally locates callers within a few seconds. Callers are typically located to within 3-20 meters in a wide range of challenging call environments where normal GPS will not work, including inside houses and moving vehicles, under heavy foliage, and in downtown urban street canyons. SnapTrack's unique Location on Demand™ feature also ensures a caller's privacy, putting location information in the hands of the user, not the network.SnapTrack's technology products permit the design of cellular phones, pagers, PDAs, and other wireless devices that operate in multiple GPS navigation modes, allowing out-of-network location coverage and a variety of thin-client applications. SnapTrack's wireless location technology products require no additional cell sites or modifications to existing network equipment and are designed to have minimal impact on cost and handset form factor. Furthermore, SnapTrack's technology is air-interface neutral and is applicable in any two-way wireless system: cellular/PCS, satellite, or paging; 800/900 MHz or 1800/1900 MHz; GSM, CDMA, TDMA, PDC or 3G air interfaces.

Headquartered in San Jose, Calif., SnapTrack is focused on integrating GPS and two-way wireless technologies. SnapTrack's patented architecture offers anytime, anywhere, accurate, high-speed location of a wireless caller, even inside buildings where conventional GPS does not operate. SnapTrack pioneered Wireless Assisted GPS, and owns patents that are fundamental to the cost-effective deployment of Wireless Assisted GPS-based location systems. SnapTrack has commercial agreements with Motorola, Texas Instruments, NTT DoCoMo, Denso, NEC, CTC, Locate Networks, GlenAyre and DSPC. NTT DoCoMo, Japan's leading cellular operator, has chosen SnapTrack as the core of its first personal locator service. For more information, please visit http://www.snaptrack.com.

Qualcomm Incorporated (www.qualcomm.com) is a leader in developing and delivering innovative digital wireless communications products and services based on the Company's Code Division Multiple Access (CDMA) digital technology. The Company's business areas include integrated CDMA chipsets and system software; technology licensing; Eudora® email software for Windows® and Macintosh® computing platforms; digital cinema systems; and satellite-based systems including portions of the Globalstar™ system and wireless fleet management systems, OmniTRACS® and OmniExpress™. Qualcomm owns patents that are essential to all of the CDMA wireless telecommunications standards that have been adopted or proposed for adoption by standards-setting bodies worldwide. Qualcomm has licensed its essential CDMA patent portfolio to more than 90 telecommunications equipment manufacturers worldwide. Headquartered in San Diego, Calif., Qualcomm is included in theS&P500 Index and is a 2000 FORTUNE 500® company traded on The Nasdaq Stock Market® under the ticker symbol QCOM.

Except for the historical information contained herein, this news release contains forward-looking statements that are subject to risks and uncertainties, including the Company's ability to successfully design and have manufactured significant quantities of CDMA components on a timely and profitable basis, the extent and speed to which CDMA is deployed, change in economic conditions of the various markets the Company serves, as well as the other risks detailed from time to time in the Company's SEC reports, including the report on Form 10-K for the year ended September 24, 2000, and most recent Form 10-Q.

###

Qualcomm Contacts
For press inquiries, view our Press Contacts page.